- CPU Coolers
- CPU Brackets/Mountings
- GPU Coolers
- Notexpress to the rescue
- Cooling Fluids
- Mainboard Cooler
- Mosfet Cooler
- PSU Coolers
- Ram Cooler
- Sets & Systeme
- Thermal compound/adhesive
Alphacool HF 38 Aufsatz für Laing DDC Pumpen
- Product No.:13986
- Shipping time: in stock
- Print product data sheet:
- Actual product may deviate from image.
The proven design of the Alphacool Laing top meets the future: Extreme highflow with 3/8” connection threads
This top replaces the black standard cover of the Laing DDC-1T and Laing DDC-1Plus pumps and adds many additional and very useful features. One of the most important is the use of 3/8” threads which makes you independent of the barbs on the original cover. The use of 3/8” threads, which have a much larger inner diameter than the common 1/4” threads on Laing covers, also makes this cover the ultimate choice for highflow applications.
Rebuilding of the pump to use this cover is easy: Simply remove the 4 screws at the bottom of the pump and lift off the original cover. Then insert the 4 included screws instead of the original ones and put the cover on top of the pump. Simply tighten the screws and you are set to go!
To ensure a safe seal of the cover simply leave the original O-ring gasket in its place during installation.
Optionally this cover also offers the possibility for decoupled installation of the pump in a 3,5” drive bay. For use of this feature only one of our decoupling kits (Prod..No.: 13701) is required to allow quick, compact and decoupled installation of the pump.
This cover is also the basis for installation of a reservoir on this pump. The optional reservoir, available at the product number 13905, can simply be screwed onto the cover and the coling loop comes to life!
Dimensions (LxWxH): 80 x 80 x 20
Material: Röhm Plexiglas GS
Connection thread size: 2x 3/8”
Side mounting threads: 4x M4
Extent of delivery:
1x Plexi top HF 38
4x Stainless steel screw M4x25mm
1x Screw plug G3/8“
1x Allen key 2,5mm
Note regarding mounting: After mounting a small gap remains between pump and top. The fit is tight as the O-ring ensures a safe seal. Hence do not over-tighten the screws, as it may result in damages to the top.
Alphacool recommended for correct operation of the water cooling distilled water!
If not mentioned in the article description, this product is shipped without a manual.
- More about...
- Shipping & Returns
- Privacy Notice
- Conditions of Use
- Where 2 Buy
- Reclamation / Reconsignment
- Send it and get one cooler for free
- alphaLCD Downloads
- Heatmaster Downloads
- Heatmaster II Downloads